Open official notice

Nellcor™ bedside spo2 patient monitoring system

Official notice

25 Jun 2025

RecallScope risk estimate:CriticalHealth Canada

An official Health Canada notice concerns Nellcor™ bedside spo2 patient monitoring system. Medtronic is issuing a safety notification for its Nellcor™ Bedside SpO2 Patient Monitoring System. This notice follows receipt of multiple reports from customers stating that the device alarm was not heard or recognized, resulting in a delay to treatment or lack of response to low oxygen saturation, respiratory failure, or arrythmia. There have also been reports of death during some of these circumstances. Through investigation, Medtronic employees found that PM100N monitors were not set into homecare mode when in use outside of a hospital or other professional care setting. Homecare mode simplifies device operation and prevents lay users from making changes to patient mode and alarm setting. Remaining in standard mode allows for users to adjust the alarm limits and patient mode. Based on available information, the Nellcor™ bedside SpO2 patient monitors continues to be safe for use in patient care. While our investigation continues, this recall is being implemented to reiterate existing information available in the operator's and service manuals and the home use guide for both the PM100N and Libra 10005941 with possible additional activities initiated when the initial investigation has been completed. Recall start date: June 23, 2025 Published 2025-06-25.

What to do now

Contact the manufacturer if you require additional information.

Recall number

77648

Official notice

2025-06-25

The hazard

Medtronic is issuing a safety notification for its Nellcor™ Bedside SpO2 Patient Monitoring System. This notice follows receipt of multiple reports from customers stating that the device alarm was not heard or recognized, resulting in a delay to treatment or lack of response to low oxygen saturation, respiratory failure, or arrythmia. There have also been reports of death during some of these circumstances. Through investigation, Medtronic employees found that PM100N monitors were not set into homecare mode when in use outside of a hospital or other professional care setting. Homecare mode simplifies device operation and prevents lay users from making changes to patient mode and alarm setting. Remaining in standard mode allows for users to adjust the alarm limits and patient mode. Based on available information, the Nellcor™ bedside SpO2 patient monitors continues to be safe for use in patient care. While our investigation continues, this recall is being implemented to reiterate existing information available in the operator's and service manuals and the home use guide for both the PM100N and Libra 10005941 with possible additional activities initiated when the initial investigation has been completed. Recall start date: June 23, 2025

How to check if you’re affected

Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.

Recall Numbers

77648

Checked manually this time?

Follow brands and keywords in the app to receive alerts for matching official notices.

Turn on recall alerts

Affected products

Product 1

Affected products - Nellcor™ Bedside SpO2 Patient Monitoring System - Main Unit, Lot or serial number - All, Model or catalog number - 10005941

Product 2

Affected products - Nellcor™ Bedside SpO2 Patient Monitoring System, Lot or serial number - All, Model or catalog number - PM100N

Hazard

Medtronic is issuing a safety notification for its Nellcor™ Bedside SpO2 Patient Monitoring System. This notice follows receipt of multiple reports from customers stating that the device alarm was not heard or recognized, resulting in a delay to treatment or lack of response to low oxygen saturation, respiratory failure, or arrythmia. There have also been reports of death during some of these circumstances. Through investigation, Medtronic employees found that PM100N monitors were not set into homecare mode when in use outside of a hospital or other professional care setting. Homecare mode simplifies device operation and prevents lay users from making changes to patient mode and alarm setting. Remaining in standard mode allows for users to adjust the alarm limits and patient mode. Based on available information, the Nellcor™ bedside SpO2 patient monitors continues to be safe for use in patient care. While our investigation continues, this recall is being implemented to reiterate existing information available in the operator's and service manuals and the home use guide for both the PM100N and Libra 10005941 with possible additional activities initiated when the initial investigation has been completed. Recall start date: June 23, 2025

Where it was sold

Retailer information is not currently available in RecallScope. Check the official notice for distribution details.

Location 1

CA · Canada

Affected area 1

CA · Canada

Company & contacts

Manufacturer

Not provided

Phone

Not provided

Brand: Covidien, Nellcor™ Bedside Spo2 Patient Monitoring System.

Source & status

Tier

official

Category

Health

Official classification

Type I

Recall details

Recall number

77648

Source tier

official

Documents, notices & source

See the official notice and source documents for full details.

View full official notice
Something wrong on this page?

Weekly recall digest

Get next week’s recalls before you need them.

One email every Monday with official-source recalls for your country, and nothing else. Unsubscribe from any email.

The digest arrives once a week. For matching recall alerts after notices are processed, get the app.

This recall was published 25 Jun 2025. The next one won’t wait for you to search.

RecallScope checks listed publishers for the brands and VINs you follow, and can alert you when a matching notice is processed.

apple-buttongoogle-button