No image published for this recall
Bentley - Possible loss of rear brake
Official notice
21 Oct 2013
Last checked
21 Oct 2013
An official DVSA notice concerns Bentley - Possible loss of rear brake. Possible loss of rear brake Published 2013-10-21.
What to do now
Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking.
Units affected
343
Recall number
R-2013-110
Official notice
2013-10-21
The hazard
The hazard
Possible loss of rear brake
How to check if you're affected
How to check if you're affected
Compare the VIN on your vehicle against the official list. If your VIN is listed, follow the official notice.
Models
Checked manually this time?
The app watches your VIN and alerts you automatically next time — no searching, no checking back.
Turn on automatic VIN checksAffected products
Affected products
Product 1
Units affected
Risk / hazard
Where it was sold
Where it was sold
The source does not list specific retailers. See the official notice for where affected vehicles were sold.
Location 1
Affected area 1
Company & contacts
Company & contacts
Brand
Manufacturer
Phone
Brand: Bentley. Contact: Driver and Vehicle Standards Agency (DVSA).
Source & status
Source & status
Recall details
Recall details
Recall number
Campaign number
Units affected
Classification
Source tier
Documents, notices & source
See the official notice and source documents for full details.
View full official noticeRelated recalls
Recall campaign – bentley continental gt continental gt convertible flying spur - incorrect front driveshafts (re26 14 rd93)
3 Jun 2026Bentley - The front seat software could result in trapping of a rear occupants legs
Bentley - The convertible roof can be activated using the key fob at distances exceeding six metres
Bentley - The adhesive bond between the sunroof and the vehicle body does not meet specification
Bentley - Risk of fire
Bentley bentayga hybrid – software update for hv battery management controller (re25 46 rd74)
Bentley - On affected vehicles the retention bracket holding the rear entertainment screens located in the rear of the front seats may have been installed in the incorrect orientation.
Bentley - When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
Bentley - The nut of the eccentric screw could break on the rear axle lower lever arm
Bentley - Continental 24, Continental Supersports and Continental Supersports Convertible
Bentley - Accumulator Valve Body O Ring Seal
Bentley - Continental GT
Recall campaign – bentley continental gt continental gt convertible flying spur - incorrect front driveshafts (re26 14 rd93)
Bentley - The convertible roof can be activated using the key fob at distances exceeding six metres
Bentley - On affected vehicles the retention bracket holding the rear entertainment screens located in the rear of the front seats may have been installed in the incorrect orientation.
Bentley - When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
Weekly recall digest
Get next week's recalls before you need them.
One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.
The digest is the slow lane — one email a week. For instant, severity-gated alerts the moment a notice is published, get the app.
This recall was published 21 Oct 2013. The next one won't wait for you to search.
RecallScope watches official sources for the brands and VINs you follow, and alerts you the moment a new notice is published.
