No image published for this recall
Bentley - On affected vehicles the retention bracket holding the rear entertainment screens located in the rear of the front seats may have been installed in the incorrect orientation.
Official notice
11 May 2023
Last checked
11 May 2023
An official DVSA notice concerns Bentley - On affected vehicles the retention bracket holding the rear entertainment screens located in the rear of the front seats may have been installed in the incorrect orientation.. On affected vehicles the retention bracket holding the rear entertainment screens located in the rear of the front seats may have been installed in the incorrect orientation. Published 2023-05-11.
What to do now
Check the orientation of the retention bracket in both front seats.� any seats found to be fitted with the incorrect bracket orientation will be reworked to replace the retention bracket assembly.
Units affected
353
Recall number
R-2023-131
Official notice
2023-05-11
The hazard
The hazard
On affected vehicles the retention bracket holding the rear entertainment screens located in the rear of the front seats may have been installed in the incorrect orientation.
How to check if you're affected
How to check if you're affected
Compare the VIN on your vehicle against the official list. If your VIN is listed, follow the official notice.
Models
Checked manually this time?
The app watches your VIN and alerts you automatically next time — no searching, no checking back.
Turn on automatic VIN checksAffected products
Affected products
Product 1
Units affected
Risk / hazard
Where it was sold
Where it was sold
The source does not list specific retailers. See the official notice for where affected vehicles were sold.
Location 1
Affected area 1
Company & contacts
Company & contacts
Brand
Manufacturer
Phone
Brand: Bentley. Contact: Driver and Vehicle Standards Agency (DVSA).
Source & status
Source & status
Recall details
Recall details
Recall number
Campaign number
Units affected
Classification
Source tier
Documents, notices & source
See the official notice and source documents for full details.
View full official noticeRelated recalls
Recall campaign – bentley continental gt continental gt convertible flying spur - incorrect front driveshafts (re26 14 rd93)
3 Jun 2026Bentley - A manufacturing issue could prevent the accelerator pedal from returning to its resting position
Bentley - The knee roll air bag wiring was crossed at the air bag control module connector
Bentley bentayga hybrid – software update for hv battery management controller (re25 46 rd74)
Bentley - On affected vehicles the electrical connectors on the w12 fuel supply module located in the fuel tank can overheat and melt the flange material. Melting of the fuel supply module flange material could result in a small fuel leak towards the top of the fuel tank.
Bentley - Incorrect front passenger seat belt assemblies without an automatic locking retractor function (alr) may have been installed
Bentley - Mulsanne
Bentley - Continental
Bentley - Incorrect software parameters have been released for the chassis control module
Bentley - The rear seat belt anchorage performance may not fulfil the load requirements on 5 seat configuration vehicles
Bentley - When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
Bentley - The second row seats may not be correctly aligned and locked on all seat rails
Recall campaign – bentley continental gt continental gt convertible flying spur - incorrect front driveshafts (re26 14 rd93)
Bentley - A manufacturing issue could prevent the accelerator pedal from returning to its resting position
Bentley - On affected vehicles the electrical connectors on the w12 fuel supply module located in the fuel tank can overheat and melt the flange material. Melting of the fuel supply module flange material could result in a small fuel leak towards the top of the fuel tank.
Bentley - Incorrect front passenger seat belt assemblies without an automatic locking retractor function (alr) may have been installed
Bentley - The rear seat belt anchorage performance may not fulfil the load requirements on 5 seat configuration vehicles
Bentley - When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
Weekly recall digest
Get next week's recalls before you need them.
One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.
The digest is the slow lane — one email a week. For instant, severity-gated alerts the moment a notice is published, get the app.
This recall was published 11 May 2023. The next one won't wait for you to search.
RecallScope watches official sources for the brands and VINs you follow, and alerts you the moment a new notice is published.
