No image published for this recall
Scania Truck - If the hand control is released when activating parking brake the brake system may release the parking brake inadvertently
Official notice
18 Sept 2019
Last checked
18 Sept 2019
An official DVSA notice concerns Scania Truck - If the hand control is released when activating parking brake the brake system may release the parking brake inadvertently. If the hand control is released when activating parking brake the brake system may release the parking brake inadvertently Published 2019-09-18.
What to do now
A software update on the control unit epb1 is to be carried out
Units affected
2,876
Recall number
R-2019-317
Official notice
2019-09-18
The hazard
The hazard
If the hand control is released when activating parking brake the brake system may release the parking brake inadvertently
How to check if you're affected
How to check if you're affected
Compare the VIN on your vehicle against the official list. If your VIN is listed, follow the official notice.
Models
Checked manually this time?
The app watches your VIN and alerts you automatically next time — no searching, no checking back.
Turn on automatic VIN checksAffected products
Affected products
Product 1
Units affected
Risk / hazard
Where it was sold
Where it was sold
The source does not list specific retailers. See the official notice for where affected products were sold.
Location 1
Affected area 1
Company & contacts
Company & contacts
Brand
Manufacturer
Phone
Brand: Scania Truck. Contact: Driver and Vehicle Standards Agency (DVSA).
Source & status
Source & status
Recall details
Recall details
Recall number
Campaign number
Units affected
Classification
Source tier
Documents, notices & source
See the official notice and source documents for full details.
View full official noticeRelated recalls
Scania Truck - There should be 2 or 3 slots at each end of the track rod link. The ball joints at the ends of the track rod are secured by tightening a clamp over the slots. In some cases there have been instances of slots missing from the track rod link.
16 Sept 2022Scania Truck - The lower nut that secures the cab tilt cylinder to a mounting bracket may not be correctly tightened
Scania Truck - Malfunction in the heat exchanger for the lng fuel tank heating
Scania Truck - The clamping force on the pinion bearing has become too low when fitting the nut to the end yoke
Scania Truck - Deviation in engine control unit software
Scania Truck - Loss of steering control
Scania Truck - Loss of steering control
Scania Truck - Directional stability & control may be affected
Scania Truck - Brake pedal foot plate may detach
Scania Truck - There should be 2 or 3 slots at each end of the track rod link. The ball joints at the ends of the track rod are secured by tightening a clamp over the slots. In some cases there have been instances of slots missing from the track rod link.
Scania Truck - The lower nut that secures the cab tilt cylinder to a mounting bracket may not be correctly tightened
Scania Truck - The clamping force on the pinion bearing has become too low when fitting the nut to the end yoke
Weekly recall digest
Get next week's recalls before you need them.
One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.
The digest is the slow lane — one email a week. For instant, severity-gated alerts the moment a notice is published, get the app.
This recall was published 18 Sept 2019. The next one won't wait for you to search.
RecallScope watches official sources for the brands and VINs you follow, and alerts you the moment a new notice is published.
