Open official notice

Minimed 630g: mmt-1715, mmt-1754, mmt-1755; minimed 670g: mmt-1740, mmt-1741, mmt-1742, mmt-1760, mmt-1761, mmt-1762, mmt-1780, mmt-1781

Official notice

6 Apr 2022

RecallScope risk estimate:CriticalFDA

An official FDA notice concerns Minimed 630g: mmt-1715, mmt-1754, mmt-1755; minimed 670g: mmt-1740, mmt-1741, mmt-1742, mmt-1760, mmt-1761, mmt-1762, mmt-1780, mmt-1781. New or replacement insulin pumps are not pre-programmed with basal rates or other verified settings (bolus wizard settings, sensor settings, etc.), which must be set up and saved on pumps prior to use. Patients who do not realize this will receive no basal insulin, which can lead to insulin under-delivery. Insulin under-delivery can cause severe hyperglycemia, which may lead to diabetic ketoacidosis. Current device labeling does not clearly identify that these insulin pumps are capable of functioning with the default basal setting of 0.0 units/hr for all 24 hours and that no error message will appear if the default basal setting remains active. Furthermore, the labeling for the affected devices does not highlight that saving the basal settings requires multiple steps and failure to complete all steps will not save the new basal settings, nor that the steps required to set and save a basal profile and other parameters which are used as part of the bolus calculator function are different. Published 2022-04-06.

What to do now

Stop using the affected device and follow the corrective action in the official FDA notice. Contact your healthcare provider or the manufacturer for next steps.

Units affected

175,801

Recall number

Z-0855-2022

Official notice

2022-04-06

The hazard

New or replacement insulin pumps are not pre-programmed with basal rates or other verified settings (bolus wizard settings, sensor settings, etc.), which must be set up and saved on pumps prior to use. Patients who do not realize this will receive no basal insulin, which can lead to insulin under-delivery. Insulin under-delivery can cause severe hyperglycemia, which may lead to diabetic ketoacidosis. Current device labeling does not clearly identify that these insulin pumps are capable of functioning with the default basal setting of 0.0 units/hr for all 24 hours and that no error message will appear if the default basal setting remains active. Furthermore, the labeling for the affected devices does not highlight that saving the basal settings requires multiple steps and failure to complete all steps will not save the new basal settings, nor that the steps required to set and save a basal profile and other parameters which are used as part of the bolus calculator function are different.

How to check if you’re affected

Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.

Event Ids

89653

Recall Numbers

Z-0855-2022

Checked manually this time?

Follow brands and keywords in the app to receive alerts for matching official notices.

Turn on recall alerts

Affected products

Product 1

MiniMed 630G: MMT-1715, MMT-1754, MMT-1755; MiniMed 670G: MMT-1740, MMT-1741, MMT-1742, MMT-1760, MMT-1761, MMT-1762, MMT-1780, MMT-1781, MMT-1782; MiniMed 770G: MMT-1880, MMT-1881, MMT-1882, MMT-1890, MMT-1891, MMT-1892; MiniMed 620G (OUS Only): MMT-1750; MiniMed 640G (OUS Only): MMT-1711, MMT-1712, MMT-1751, MMT-1752; MiniMed 720G (OUS Only): MMT-1809, MMT-1810, MMT-1859, MMT-1860; MiniMed 740G (OUS Only): MMT-1811, MMT-1812, MMT-1861, MMT-1862; MiniMed 780G (OUS Only): MMT-1884, MMT-1885, MMT-1886, MMT-1895, MMT-1896 The MiniMed" 630G System with SmartGuard is intended for continuous delivery of basal insulin (at user selected rates) and administration of insulin boluses (in user selectable amounts) for the management of Type 1 diabetes mellitus in persons sixteen years of age and older.

Units affected

175,801

Hazard

New or replacement insulin pumps are not pre-programmed with basal rates or other verified settings (bolus wizard settings, sensor settings, etc.), which must be set up and saved on pumps prior to use. Patients who do not realize this will receive no basal insulin, which can lead to insulin under-delivery. Insulin under-delivery can cause severe hyperglycemia, which may lead to diabetic ketoacidosis. Current device labeling does not clearly identify that these insulin pumps are capable of functioning with the default basal setting of 0.0 units/hr for all 24 hours and that no error message will appear if the default basal setting remains active. Furthermore, the labeling for the affected devices does not highlight that saving the basal settings requires multiple steps and failure to complete all steps will not save the new basal settings, nor that the steps required to set and save a basal profile and other parameters which are used as part of the bolus calculator function are different.

Where it was sold

Retailer information is not currently available in RecallScope. Check the official notice for distribution details.

Location 1

US · United States · AK

Location 2

US · United States · AL

Location 3

US · United States · AR

Location 4

US · United States · AZ

Location 5

US · United States · CA

Location 6

US · United States · CO

Location 7

US · United States · CT

Location 8

US · United States · DC

Location 9

US · United States · DE

Location 10

US · United States · FL

Location 11

US · United States · GA

Location 12

US · United States · HI

Location 13

US · United States · IA

Location 14

US · United States · ID

Location 15

US · United States · IL

Location 16

US · United States · IN

Location 17

US · United States · KS

Location 18

US · United States · KY

Location 19

US · United States · LA

Location 20

US · United States · MA

Location 21

US · United States · MD

Location 22

US · United States · ME

Location 23

US · United States · MI

Location 24

US · United States · MN

Location 25

US · United States · MO

Location 26

US · United States · MS

Location 27

US · United States · MT

Location 28

US · United States · NC

Location 29

US · United States · ND

Location 30

US · United States · NE

Location 31

US · United States · NH

Location 32

US · United States · NJ

Location 33

US · United States · NM

Location 34

US · United States · NV

Location 35

US · United States · NY

Location 36

US · United States · OH

Location 37

US · United States · OK

Location 38

US · United States · OR

Location 39

US · United States · PA

Location 40

US · United States · RI

Location 41

US · United States · SC

Location 42

US · United States · SD

Location 43

US · United States · TN

Location 44

US · United States · TX

Location 45

US · United States · UT

Location 46

US · United States · VA

Location 47

US · United States · VT

Location 48

US · United States · WA

Location 49

US · United States · WI

Location 50

US · United States · WV

Location 51

US · United States · WY

Affected area 1

US · United States

Affected area 2

AU · Australia

Affected area 3

JP · Japan

Affected area 4

KR · South Korea

Affected area 5

NZ · New Zealand

Affected area 6

TW · Taiwan

Company & contacts

Manufacturer

Medtronic MiniMed

Phone

Not provided

Brand: MINI, Medtronic Minimed. Contact: Medtronic MiniMed.

Source & status

Source

Tier

official

Category

Tech & Electronics

Official classification

Class II

Recall details

Recall number

Z-0855-2022

Event ID

89653

Units affected

175,801

Status

active

Source tier

official

Documents, notices & source

See the official notice and source documents for full details.

View full official notice
Something wrong on this page?

Weekly recall digest

Get next week’s recalls before you need them.

One email every Monday with official-source recalls for your country, and nothing else. Unsubscribe from any email.

The digest arrives once a week. For matching recall alerts after notices are processed, get the app.

This recall was published 6 Apr 2022. The next one won’t wait for you to search.

RecallScope checks listed publishers for the brands and VINs you follow, and can alert you when a matching notice is processed.

apple-buttongoogle-button