Image not available in RecallScope.
Motor vehicle “Honda: Fit” - Repair
Official notice
24 Dec 2013
Last checked
27 Oct 2026
An official CAA Japan notice concerns Motor vehicle “Honda: Fit” - Repair. Due to defects in the power transmission system (automatic transmission control computer). 1) In vehicles equipped with a 7-speed DCT* automatic transmission, inappropriate programming of the engine control unit (ECU) may cause engine speed to drop when the accelerator is released at low vehicle speeds, because engine output is lower than the load imposed on the engine by the motor during charging. This may cause unstable engine operation and stalling. (Restarting and driving after stopping are possible.) 2) In vehicles equipped with a 7-speed DCT automatic transmission, inappropriate programming of the transmission driver unit (TDU) may cause the following: ① When the vehicle is started, differences in clock accuracy between the 2 types of ICs monitoring the output of the gear-change actuator may cause the system to incorrectly determine that startup preparations are incomplete even though they are complete. As a result, the transmission warning light on the meter display may flash and the “Check transmission” message may illuminate, and the vehicle may fail to start from its parked state. ② When the program launches during vehicle startup, it may erase some data required for startup. As a result, the vehicle may fail to start from its parked state even when the power switch is pressed. 3) In vehicles equipped with a 7-speed DCT automatic transmission, inappropriate programming of the hydrostatic clutch actuator (HCA) may cause the sensor that detects the travel of the piston controlling clutch engagement force to detect the travel incorrectly. As a result, the system may determine that there is an internal HCA abnormality, the transmission warning light on the meter display may flash and the “Check transmission” message may illuminate, and the vehicle may be unable to move forward from a stop or reverse. *DCT: Dual-clutch transmission. Published 2013-12-24.
What to do now
Ministry of Land, Infrastructure, Transport and Tourism recall notification number: 3278. 1) Modify the engine control unit (ECU) program in all vehicles. 2) Modify the transmission driver unit (TDU) program in all vehicles. 3) Modify the hydrostatic clutch actuator (HCA) program in all vehicles.
Official notice
2013-12-24
The hazard
The hazard
Due to defects in the power transmission system (automatic transmission control computer). 1) In vehicles equipped with a 7-speed DCT* automatic transmission, inappropriate programming of the engine control unit (ECU) may cause engine speed to drop when the accelerator is released at low vehicle speeds, because engine output is lower than the load imposed on the engine by the motor during charging. This may cause unstable engine operation and stalling. (Restarting and driving after stopping are possible.) 2) In vehicles equipped with a 7-speed DCT automatic transmission, inappropriate programming of the transmission driver unit (TDU) may cause the following: ① When the vehicle is started, differences in clock accuracy between the 2 types of ICs monitoring the output of the gear-change actuator may cause the system to incorrectly determine that startup preparations are incomplete even though they are complete. As a result, the transmission warning light on the meter display may flash and the “Check transmission” message may illuminate, and the vehicle may fail to start from its parked state. ② When the program launches during vehicle startup, it may erase some data required for startup. As a result, the vehicle may fail to start from its parked state even when the power switch is pressed. 3) In vehicles equipped with a 7-speed DCT automatic transmission, inappropriate programming of the hydrostatic clutch actuator (HCA) may cause the sensor that detects the travel of the piston controlling clutch engagement force to detect the travel incorrectly. As a result, the system may determine that there is an internal HCA abnormality, the transmission warning light on the meter display may flash and the “Check transmission” message may illuminate, and the vehicle may be unable to move forward from a stop or reverse. *DCT: Dual-clutch transmission.
How to check if you're affected
How to check if you're affected
Product identifiers are not currently available in RecallScope. Check the official notice before deciding whether your item is affected.
Checked manually this time?
Add your VIN to the app Watchlist to receive alerts for matching official notices.
Turn on automatic VIN checksAffected products
Affected products
Product 1
Hazard
Where it was sold
Where it was sold
Retailer information is not currently available in RecallScope. Check the official notice for distribution details.
Location 1
Affected area 1
Company & contacts
Company & contacts
Brand
Manufacturer
Phone
Brand: 自動車. Contact: 本田技研工業株式会社. Phone 0120-112010.
Source & status
Source & status
Recall details
Recall details
Event id
Source tier
Documents, notices & source
See the official notice and source documents for full details.
View full official noticeWeekly recall digest
Get next week's recalls before you need them.
One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.
The digest arrives once a week. For matching recall alerts after notices are processed, get the app.