Open official notice

Passenger cars (Toyota Crown and others) - Repair

Official notice

21 Oct 2010

Last checked

28 Oct 2026

RecallScope risk estimate:HighCAA Japan

An official CAA Japan notice concerns Passenger cars (Toyota Crown and others) - Repair. ■ Defective components (part names): ① Fuel system (fuel pump wiring). ② Braking system (brake master cylinder). ■ Noncompliant structure, equipment or performance and its cause: ① The fuel pump wiring inside the fuel tank is made of material that does not bend easily. If a change in tank pressure when the fuel filler is opened causes substantial displacement of the pump mounting surface, the connecting terminals may slide against each other. Continued use may wear the connecting terminals. Heat generated by electrical current may then reduce terminal mating force and cause poor electrical contact, stopping the fuel pump and potentially preventing the engine from starting or causing it to stall while driving. ② Lubricity evaluations of brake fluids used in the market were insufficient for the brake master cylinder. Consequently, even brake fluid that meets the specifications may provide insufficient lubrication to the rubber seal at the rear end of the cylinder if it has a low polymer content, causing the seal to turn over. Brake fluid may then leak through the seal and illuminate the warning light. Continued use may, in the worst case, reduce braking force. Published 2010-10-21.

What to do now

(Recall) 2625 ■ Remedial measures: ① Replace the affected wiring with improved parts on all vehicles. ② Replace the affected seal with an improved part and inspect for brake fluid leakage from the master cylinder on all vehicles. If brake fluid leakage is found, replace the brake booster with a new one.

Recall number

2625

Official notice

2010-10-21

The hazard

■ Defective components (part names): ① Fuel system (fuel pump wiring). ② Braking system (brake master cylinder). ■ Noncompliant structure, equipment or performance and its cause: ① The fuel pump wiring inside the fuel tank is made of material that does not bend easily. If a change in tank pressure when the fuel filler is opened causes substantial displacement of the pump mounting surface, the connecting terminals may slide against each other. Continued use may wear the connecting terminals. Heat generated by electrical current may then reduce terminal mating force and cause poor electrical contact, stopping the fuel pump and potentially preventing the engine from starting or causing it to stall while driving. ② Lubricity evaluations of brake fluids used in the market were insufficient for the brake master cylinder. Consequently, even brake fluid that meets the specifications may provide insufficient lubrication to the rubber seal at the rear end of the cylinder if it has a low polymer content, causing the seal to turn over. Brake fluid may then leak through the seal and illuminate the warning light. Continued use may, in the worst case, reduce braking force.

How to check if you're affected

Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.

Recall Numbers

2625

Checked manually this time?

Add your VIN to the app Watchlist to receive alerts for matching official notices.

Turn on automatic VIN checks

Affected products

Product 1

トヨタ クラウン 他

Hazard

■ Defective components (part names): ① Fuel system (fuel pump wiring). ② Braking system (brake master cylinder). ■ Noncompliant structure, equipment or performance and its cause: ① The fuel pump wiring inside the fuel tank is made of material that does not bend easily. If a change in tank pressure when the fuel filler is opened causes substantial displacement of the pump mounting surface, the connecting terminals may slide against each other. Continued use may wear the connecting terminals. Heat generated by electrical current may then reduce terminal mating force and cause poor electrical contact, stopping the fuel pump and potentially preventing the engine from starting or causing it to stall while driving. ② Lubricity evaluations of brake fluids used in the market were insufficient for the brake master cylinder. Consequently, even brake fluid that meets the specifications may provide insufficient lubrication to the rubber seal at the rear end of the cylinder if it has a low polymer content, causing the seal to turn over. Brake fluid may then leak through the seal and illuminate the warning light. Continued use may, in the worst case, reduce braking force.

Where it was sold

Retailer information is not currently available in RecallScope. Check the official notice for distribution details.

Location 1

JP · Japan

Affected area 1

JP · Japan

Company & contacts

Brand

Manufacturer

トヨタお客様相談センター

Phone

0800-700-7700, 0800-500-5577

Brand: Toyota. Contact: トヨタお客様相談センター. Phone 0800-700-7700, 0800-500-5577.

Source & status

Source

Tier

official

Category

VEHICLES

Official classification

消費者庁 — 修理

Recall details

Recall number

2625

Event id

CAA-00000001586

Source tier

official

Documents, notices & source

See the official notice and source documents for full details.

View full official notice
Something wrong on this page?

Weekly recall digest

Get next week's recalls before you need them.

One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.

The digest arrives once a week. For matching recall alerts after notices are processed, get the app.

This recall was published 21 Oct 2010. The next one won't wait for you to search.

RecallScope checks listed publishers for the brands and VINs you follow, and can alert you when a matching notice is processed.

apple-buttongoogle-button