Image available on the official notice.
三菱自動車工業株式会社 "Outlander PHEV", "Outlander", "Delica" - Inspection and repair
Official notice
5 Jun 2013
Last checked
27 Oct 2026
An official CAA Japan notice concerns 三菱自動車工業株式会社 "Outlander PHEV", "Outlander", "Delica" - Inspection and repair. Defects in the steering system (electric power steering), turn signals, and other equipment. ① An improper manufacturing process for components in the circuit monitoring the microcomputer power supply voltage inside the electric power steering control unit (EPS ECU) resulted in some components having defective characteristics. Consequently, the voltage monitoring circuit may malfunction, displaying "Check power steering system" on the information screen and stopping EPS assistance, increasing the effort required to steer. ② An improper program in the ETACS ECU (which controls turn signals, hazard warning lights, and other functions) may prevent the hazard light acknowledgment (flashing the hazard warning lights to confirm acceptance of an operation) from working when the electric tailgate operates. In this condition, the turn signals do not illuminate even when the turn signal lever is operated. ③ On vehicles with factory-installed navigation systems, an improper navigation program may prevent the screen from switching to the side-view camera image when the camera switch is operated. In this condition, the area immediately in front of and immediately to the left of the vehicle cannot be checked. ④ An improper control program for the electric oil pump circulating oil to cool and lubricate the generator and front traction motor may cause the pump to stop working. Consequently, a warning sounds, the EV system warning light in the instrument panel illuminates, and the information screen displays an EV system malfunction. The vehicle enters fail-safe mode (power generation is disabled, output is restricted, and maximum speed is limited to 50km/h). It runs using only the rear traction motor for as long as the remaining battery charge allows; continued driving will leave the vehicle undrivable. ⑤ On vehicles equipped with ACC (a system that automatically maintains distance from and follows the preceding vehicle) and FCM (a system that automatically applies the brakes to reduce collision damage), an improper ACC/FCM ECU program may cause the following: • While driving with ACC in use, tunnel walls and similar objects may be misidentified as a preceding vehicle, activating automatic braking and slowing the vehicle. • An error during computation may reset the ECU and cause a communication fault. A warning then sounds and the instrument panel information screen displays "Check ACC", "Check FCM", and "Check ASC (stability control system) system"; ACC and FCM stop functioning. Published 2013-06-05.
What to do now
Ministry of Land, Infrastructure, Transport and Tourism recall notification number: 3168. ① Replace the EPS ECU with a modified unit. ② Reprogram the ETACS ECU with the corrected program. Because supplying parts for the corrective measures will take time, notify all users of the defect as an interim measure and request that, until replacement parts are ready, they operate the hazard warning light switch before driving whenever they have used the electric tailgate. ③ Reprogram the navigation system with the corrected program. ④ Replace the electric oil pump with a modified unit. ⑤ Reprogram the ACC/FCM ECU with the corrected program.
Units affected
4,213
Official notice
2013-06-05
The hazard
The hazard
Defects in the steering system (electric power steering), turn signals, and other equipment. ① An improper manufacturing process for components in the circuit monitoring the microcomputer power supply voltage inside the electric power steering control unit (EPS ECU) resulted in some components having defective characteristics. Consequently, the voltage monitoring circuit may malfunction, displaying "Check power steering system" on the information screen and stopping EPS assistance, increasing the effort required to steer. ② An improper program in the ETACS ECU (which controls turn signals, hazard warning lights, and other functions) may prevent the hazard light acknowledgment (flashing the hazard warning lights to confirm acceptance of an operation) from working when the electric tailgate operates. In this condition, the turn signals do not illuminate even when the turn signal lever is operated. ③ On vehicles with factory-installed navigation systems, an improper navigation program may prevent the screen from switching to the side-view camera image when the camera switch is operated. In this condition, the area immediately in front of and immediately to the left of the vehicle cannot be checked. ④ An improper control program for the electric oil pump circulating oil to cool and lubricate the generator and front traction motor may cause the pump to stop working. Consequently, a warning sounds, the EV system warning light in the instrument panel illuminates, and the information screen displays an EV system malfunction. The vehicle enters fail-safe mode (power generation is disabled, output is restricted, and maximum speed is limited to 50km/h). It runs using only the rear traction motor for as long as the remaining battery charge allows; continued driving will leave the vehicle undrivable. ⑤ On vehicles equipped with ACC (a system that automatically maintains distance from and follows the preceding vehicle) and FCM (a system that automatically applies the brakes to reduce collision damage), an improper ACC/FCM ECU program may cause the following: • While driving with ACC in use, tunnel walls and similar objects may be misidentified as a preceding vehicle, activating automatic braking and slowing the vehicle. • An error during computation may reset the ECU and cause a communication fault. A warning then sounds and the instrument panel information screen displays "Check ACC", "Check FCM", and "Check ASC (stability control system) system"; ACC and FCM stop functioning.
How to check if you're affected
How to check if you're affected
Product identifiers are not currently available in RecallScope. Check the official notice before deciding whether your item is affected.
Checked manually this time?
Add your VIN to the app Watchlist to receive alerts for matching official notices.
Turn on automatic VIN checksAffected products
Affected products
Product 1
Product 2
Product 3
Units affected
Hazard
Where it was sold
Where it was sold
Retailer information is not currently available in RecallScope. Check the official notice for distribution details.
Location 1
Affected area 1
Company & contacts
Company & contacts
Brand
Manufacturer
Phone
Brand: 三菱自動車工業. Contact: お客様相談センター. Phone 0120-324-860.
Source & status
Source & status
Recall details
Recall details
Event id
Units affected
Source tier
Documents, notices & source
See the official notice and source documents for full details.
View full official noticeWeekly recall digest
Get next week's recalls before you need them.
One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.
The digest arrives once a week. For matching recall alerts after notices are processed, get the app.