Open official notice

Passenger cars (Mazda CX-60, MAZDA3) - Repair

Official notice

26 Oct 2023

Last checked

27 Oct 2026

RecallScope risk estimate:HighCAA Japan

An official CAA Japan notice concerns Passenger cars (Mazda CX-60, MAZDA3) - Repair. Defects in the power unit (engine control computer, electric drive control computer), reversing rear visibility device, rear-view mirrors and related equipment (view monitor unit). ■ Defective components: ①② Power unit (engine control computer). ③ Power unit (electric drive control computer). ④⑤ Reversing rear visibility device, rear-view mirrors and related equipment (view monitor unit). ■ Conditions and causes of the structure, equipment or performance deemed noncompliant with standards: ① Due to inappropriate hybrid system startup conditions in the engine control computer, if the push-button start is switched on to restart approximately 8 seconds after being switched off, the mild hybrid battery relay circuit may fail to connect. Consequently, a "Hybrid system malfunction" message appears on the instrument panel, the engine warning light illuminates, and the transmission may become locked in the N range, preventing driving. The engine also cannot be started within approximately 90 seconds after the push-button start is switched off. ② Due to inappropriate fault determination conditions in the engine control computer, if an engine shutdown initiated by the idle stop system is interrupted by accelerator operation or similar action, the computer may temporarily be unable to correctly identify the cylinders for fuel injection. It may then incorrectly determine that a fault has occurred and prohibit fuel injection. Fuel cannot be injected until the cylinders for fuel injection are correctly identified; if the vehicle is moving, it may decelerate, and if stationary, the engine may fail to restart. ③ Due to inappropriate fail-safe activation conditions in the electric drive control computer, if a cooling malfunction occurs in the plug-in hybrid inverter, the inverter may overheat even when motor operation is restricted. If use continues in this condition, the engine warning light and hybrid system warning light illuminate. When the fail-safe activates to stop the motor, the engine may also stop at the same time, preventing driving. ④ Due to inappropriate system startup conditions in the view monitor unit, the system that switches to the side and rear cameras may fail to start during startup. Consequently, the i-ACTIVSENSE warning light illuminates and a message indicating a view monitor unit malfunction appears on the instrument panel display. Images from the side and rear cameras may also fail to display. ⑤ Due to inappropriate system processing conditions in the view monitor unit, the memory may fail to reset during a restart. Consequently, insufficient memory slows image processing, causing the center display image to become distorted and turn black, which may prevent images from the side and rear cameras from being displayed. Published 2023-10-26.

What to do now

(Recall notification number) 5384. ■ Corrective measures: ①② On all vehicles, modify the engine control computer control program to the corrected program. ③ On all vehicles, modify the electric drive control computer control program to the corrected program. Also update the engine control computer control program to a program compatible with the corrected electric drive control computer program. ④⑤ On all vehicles, modify the view monitor unit control program to the corrected program.

Units affected

27,699

Recall number

5384

Official notice

2023-10-26

The hazard

Defects in the power unit (engine control computer, electric drive control computer), reversing rear visibility device, rear-view mirrors and related equipment (view monitor unit). ■ Defective components: ①② Power unit (engine control computer). ③ Power unit (electric drive control computer). ④⑤ Reversing rear visibility device, rear-view mirrors and related equipment (view monitor unit). ■ Conditions and causes of the structure, equipment or performance deemed noncompliant with standards: ① Due to inappropriate hybrid system startup conditions in the engine control computer, if the push-button start is switched on to restart approximately 8 seconds after being switched off, the mild hybrid battery relay circuit may fail to connect. Consequently, a "Hybrid system malfunction" message appears on the instrument panel, the engine warning light illuminates, and the transmission may become locked in the N range, preventing driving. The engine also cannot be started within approximately 90 seconds after the push-button start is switched off. ② Due to inappropriate fault determination conditions in the engine control computer, if an engine shutdown initiated by the idle stop system is interrupted by accelerator operation or similar action, the computer may temporarily be unable to correctly identify the cylinders for fuel injection. It may then incorrectly determine that a fault has occurred and prohibit fuel injection. Fuel cannot be injected until the cylinders for fuel injection are correctly identified; if the vehicle is moving, it may decelerate, and if stationary, the engine may fail to restart. ③ Due to inappropriate fail-safe activation conditions in the electric drive control computer, if a cooling malfunction occurs in the plug-in hybrid inverter, the inverter may overheat even when motor operation is restricted. If use continues in this condition, the engine warning light and hybrid system warning light illuminate. When the fail-safe activates to stop the motor, the engine may also stop at the same time, preventing driving. ④ Due to inappropriate system startup conditions in the view monitor unit, the system that switches to the side and rear cameras may fail to start during startup. Consequently, the i-ACTIVSENSE warning light illuminates and a message indicating a view monitor unit malfunction appears on the instrument panel display. Images from the side and rear cameras may also fail to display. ⑤ Due to inappropriate system processing conditions in the view monitor unit, the memory may fail to reset during a restart. Consequently, insufficient memory slows image processing, causing the center display image to become distorted and turn black, which may prevent images from the side and rear cameras from being displayed.

How to check if you're affected

Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.

Models

3CA-KH3R3P, 3DA-KH3P, 5BA-KH5P, 5LA-KH5S3P, 3DA-BP8R, 5AA-BPFJ3R, 5AA-BPEK3R, 6BA-BP5R

Recall Numbers

5384

Checked manually this time?

Add your VIN to the app Watchlist to receive alerts for matching official notices.

Turn on automatic VIN checks

Affected products

Product 1

マツダ「CX-60」「MAZDA3」

Units affected

27,699

Hazard

Defects in the power unit (engine control computer, electric drive control computer), reversing rear visibility device, rear-view mirrors and related equipment (view monitor unit). ■ Defective components: ①② Power unit (engine control computer). ③ Power unit (electric drive control computer). ④⑤ Reversing rear visibility device, rear-view mirrors and related equipment (view monitor unit). ■ Conditions and causes of the structure, equipment or performance deemed noncompliant with standards: ① Due to inappropriate hybrid system startup conditions in the engine control computer, if the push-button start is switched on to restart approximately 8 seconds after being switched off, the mild hybrid battery relay circuit may fail to connect. Consequently, a "Hybrid system malfunction" message appears on the instrument panel, the engine warning light illuminates, and the transmission may become locked in the N range, preventing driving. The engine also cannot be started within approximately 90 seconds after the push-button start is switched off. ② Due to inappropriate fault determination conditions in the engine control computer, if an engine shutdown initiated by the idle stop system is interrupted by accelerator operation or similar action, the computer may temporarily be unable to correctly identify the cylinders for fuel injection. It may then incorrectly determine that a fault has occurred and prohibit fuel injection. Fuel cannot be injected until the cylinders for fuel injection are correctly identified; if the vehicle is moving, it may decelerate, and if stationary, the engine may fail to restart. ③ Due to inappropriate fail-safe activation conditions in the electric drive control computer, if a cooling malfunction occurs in the plug-in hybrid inverter, the inverter may overheat even when motor operation is restricted. If use continues in this condition, the engine warning light and hybrid system warning light illuminate. When the fail-safe activates to stop the motor, the engine may also stop at the same time, preventing driving. ④ Due to inappropriate system startup conditions in the view monitor unit, the system that switches to the side and rear cameras may fail to start during startup. Consequently, the i-ACTIVSENSE warning light illuminates and a message indicating a view monitor unit malfunction appears on the instrument panel display. Images from the side and rear cameras may also fail to display. ⑤ Due to inappropriate system processing conditions in the view monitor unit, the memory may fail to reset during a restart. Consequently, insufficient memory slows image processing, causing the center display image to become distorted and turn black, which may prevent images from the side and rear cameras from being displayed.

Where it was sold

Retailer information is not currently available in RecallScope. Check the official notice for distribution details.

Location 1

JP · Japan

Affected area 1

JP · Japan

Company & contacts

Brand

Manufacturer

マツダ株式会社

Phone

0120-386-919

Brand: Mazda. Contact: マツダ株式会社. Phone 0120-386-919.

Source & status

Source

Tier

official

Category

VEHICLES

Official classification

消費者庁 — 修理

Recall details

Recall number

5384

Event id

CAA-00000031482

Units affected

27,699

Source tier

official

Documents, notices & source

See the official notice and source documents for full details.

View full official notice
Something wrong on this page?

Weekly recall digest

Get next week's recalls before you need them.

One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.

The digest arrives once a week. For matching recall alerts after notices are processed, get the app.

This recall was published 26 Oct 2023. The next one won't wait for you to search.

RecallScope checks listed publishers for the brands and VINs you follow, and can alert you when a matching notice is processed.

apple-buttongoogle-button