Open official notice

Passenger cars (Mazda CX-5 and others) - Repair

Official notice

19 Mar 2020

Last checked

27 Oct 2026

RecallScope risk estimate:HighCAA Japan

An official CAA Japan notice concerns Passenger cars (Mazda CX-5 and others) - Repair. Engine (engine control computer) defect. ■ Defective component: Engine (engine control computer). ■ Conditions and causes of the structure, equipment or performance deemed noncompliant with standards: ① Due to an inappropriate control program for the engine intake shutter valve, soot and other deposits around the valve may prevent correct control of its opening. When the engine warning light illuminates, the fail-safe may not function adequately, and the valve may fail to open fully. Consequently, if deposits cause the valve to stick fully closed, the engine may stop. ② Due to an inappropriate fault detection program for the engine exhaust pressure sensor, a fault is not detected when moisture entering the sensor causes its output to drift and exhaust emissions cease to meet the standards. Continued use in this condition may allow the moisture to corrode the electronic circuitry inside the exhaust pressure sensor, causing an open circuit and illuminating the engine warning light. Fail-safe control may then disable idling stop and increase gearshift shock. Published 2020-03-19.

What to do now

(Recall) 4689 ■ Remedial measures: ① On all vehicles, inspect the engine control computer and update the intake shutter valve control program to the remedial program. If inspection identifies an abnormality in the intake shutter valve, replace the valve with a new one. Also replace the intake shutter valve with a new one if the engine warning light illuminates after the program update. ② On all vehicles, inspect the engine control computer and update the exhaust pressure sensor control program to the remedial program. If inspection identifies an abnormality in the exhaust pressure sensor, replace it with a new current-specification sensor. Also replace the exhaust pressure sensor with a new current-specification sensor if the engine warning light illuminates after the program update.

Recall number

4689

Official notice

2020-03-19

The hazard

Engine (engine control computer) defect. ■ Defective component: Engine (engine control computer). ■ Conditions and causes of the structure, equipment or performance deemed noncompliant with standards: ① Due to an inappropriate control program for the engine intake shutter valve, soot and other deposits around the valve may prevent correct control of its opening. When the engine warning light illuminates, the fail-safe may not function adequately, and the valve may fail to open fully. Consequently, if deposits cause the valve to stick fully closed, the engine may stop. ② Due to an inappropriate fault detection program for the engine exhaust pressure sensor, a fault is not detected when moisture entering the sensor causes its output to drift and exhaust emissions cease to meet the standards. Continued use in this condition may allow the moisture to corrode the electronic circuitry inside the exhaust pressure sensor, causing an open circuit and illuminating the engine warning light. Fail-safe control may then disable idling stop and increase gearshift shock.

How to check if you're affected

Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.

Recall Numbers

4689

Checked manually this time?

Add your VIN to the app Watchlist to receive alerts for matching official notices.

Turn on automatic VIN checks

Affected products

Product 1

マツダ CX-5 他

Hazard

Engine (engine control computer) defect. ■ Defective component: Engine (engine control computer). ■ Conditions and causes of the structure, equipment or performance deemed noncompliant with standards: ① Due to an inappropriate control program for the engine intake shutter valve, soot and other deposits around the valve may prevent correct control of its opening. When the engine warning light illuminates, the fail-safe may not function adequately, and the valve may fail to open fully. Consequently, if deposits cause the valve to stick fully closed, the engine may stop. ② Due to an inappropriate fault detection program for the engine exhaust pressure sensor, a fault is not detected when moisture entering the sensor causes its output to drift and exhaust emissions cease to meet the standards. Continued use in this condition may allow the moisture to corrode the electronic circuitry inside the exhaust pressure sensor, causing an open circuit and illuminating the engine warning light. Fail-safe control may then disable idling stop and increase gearshift shock.

Where it was sold

Retailer information is not currently available in RecallScope. Check the official notice for distribution details.

Location 1

JP · Japan

Affected area 1

JP · Japan

Company & contacts

Brand

Manufacturer

マツダ(株)コールセンター

Phone

0120-386-919

Brand: Mazda. Contact: マツダ(株)コールセンター. Phone 0120-386-919.

Source & status

Source

Tier

official

Category

VEHICLES

Official classification

消費者庁 — 修理

Recall details

Recall number

4689

Event id

CAA-00000026482

Source tier

official

Documents, notices & source

See the official notice and source documents for full details.

View full official notice
Something wrong on this page?

Weekly recall digest

Get next week's recalls before you need them.

One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.

The digest arrives once a week. For matching recall alerts after notices are processed, get the app.

This recall was published 19 Mar 2020. The next one won't wait for you to search.

RecallScope checks listed publishers for the brands and VINs you follow, and can alert you when a matching notice is processed.

apple-buttongoogle-button