Open official notice

Passenger cars (Mazda CX-5 and others) - Repair

Official notice

8 Nov 2018

Last checked

27 Oct 2026

RecallScope risk estimate:HighCAA Japan

An official CAA Japan notice concerns Passenger cars (Mazda CX-5 and others) - Repair. Engine defects. ■ Defective parts (component names): ① Engine (intake valve springs); ②③ Engine (engine control computer). ■ Description and cause of the structure, equipment or performance considered noncompliant with standards: ① The specified spring load for the engine's intake valve springs is inappropriate, resulting in insufficient intake valve closing force. The valves may be unable to crush soot trapped between the intake valve and valve seat, causing poor compression. Consequently, engine speed may become unstable and, in the worst case, the engine may stall. ② The control program for the engine's intake shutter valve is inappropriate. Soot and other deposits around the valve may prevent correct control of the valve opening, and when the engine warning light illuminates, the fail-safe may not function sufficiently to open the valve fully. Consequently, if soot or other deposits cause the valve to stick fully closed, the engine may stall. ③ The fault detection program for the engine's exhaust pressure sensor is inappropriate. If water entering the sensor causes its output to deviate and exhaust emissions no longer meet the standards, the program does not detect the fault. Continued use in this condition may allow the water to corrode the electronic circuit inside the exhaust pressure sensor and cause an open circuit, illuminating the engine warning light. Fail-safe control may then disable the idling stop function and cause increased shift shock. Published 2018-11-08.

What to do now

(Recall) 4351 ■ Corrective measures: ① On all vehicles, replace the intake valve springs with improved parts. Because replacement takes time, vehicles will be handled sequentially, starting with older model years. ② On all vehicles, inspect the engine control computer and update the intake shutter valve control program to the corrective program. If the inspection identifies an abnormality in the intake shutter valve, replace it with a new one. Also replace the intake shutter valve with a new one if the engine warning light illuminates after the program update. ③ On all vehicles, inspect the engine control computer and update the exhaust pressure sensor control program to the corrective program. If the inspection identifies an abnormality in the exhaust pressure sensor, replace it with a new current-specification sensor. Also replace the exhaust pressure sensor with a new current-specification sensor if the engine warning light illuminates after the program update.

Recall number

4351

Official notice

2018-11-08

The hazard

Engine defects. ■ Defective parts (component names): ① Engine (intake valve springs); ②③ Engine (engine control computer). ■ Description and cause of the structure, equipment or performance considered noncompliant with standards: ① The specified spring load for the engine's intake valve springs is inappropriate, resulting in insufficient intake valve closing force. The valves may be unable to crush soot trapped between the intake valve and valve seat, causing poor compression. Consequently, engine speed may become unstable and, in the worst case, the engine may stall. ② The control program for the engine's intake shutter valve is inappropriate. Soot and other deposits around the valve may prevent correct control of the valve opening, and when the engine warning light illuminates, the fail-safe may not function sufficiently to open the valve fully. Consequently, if soot or other deposits cause the valve to stick fully closed, the engine may stall. ③ The fault detection program for the engine's exhaust pressure sensor is inappropriate. If water entering the sensor causes its output to deviate and exhaust emissions no longer meet the standards, the program does not detect the fault. Continued use in this condition may allow the water to corrode the electronic circuit inside the exhaust pressure sensor and cause an open circuit, illuminating the engine warning light. Fail-safe control may then disable the idling stop function and cause increased shift shock.

How to check if you're affected

Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.

Recall Numbers

4351

Checked manually this time?

Add your VIN to the app Watchlist to receive alerts for matching official notices.

Turn on automatic VIN checks

Affected products

Product 1

マツダ CX-5 他

Hazard

Engine defects. ■ Defective parts (component names): ① Engine (intake valve springs); ②③ Engine (engine control computer). ■ Description and cause of the structure, equipment or performance considered noncompliant with standards: ① The specified spring load for the engine's intake valve springs is inappropriate, resulting in insufficient intake valve closing force. The valves may be unable to crush soot trapped between the intake valve and valve seat, causing poor compression. Consequently, engine speed may become unstable and, in the worst case, the engine may stall. ② The control program for the engine's intake shutter valve is inappropriate. Soot and other deposits around the valve may prevent correct control of the valve opening, and when the engine warning light illuminates, the fail-safe may not function sufficiently to open the valve fully. Consequently, if soot or other deposits cause the valve to stick fully closed, the engine may stall. ③ The fault detection program for the engine's exhaust pressure sensor is inappropriate. If water entering the sensor causes its output to deviate and exhaust emissions no longer meet the standards, the program does not detect the fault. Continued use in this condition may allow the water to corrode the electronic circuit inside the exhaust pressure sensor and cause an open circuit, illuminating the engine warning light. Fail-safe control may then disable the idling stop function and cause increased shift shock.

Where it was sold

Retailer information is not currently available in RecallScope. Check the official notice for distribution details.

Location 1

JP · Japan

Affected area 1

JP · Japan

Company & contacts

Brand

Manufacturer

マツダ(株)コールセンター

Phone

0120-386-919

Brand: Mazda. Contact: マツダ(株)コールセンター. Phone 0120-386-919.

Source & status

Source

Tier

official

Category

VEHICLES

Official classification

消費者庁 — 修理

Recall details

Recall number

4351

Event id

CAA-00000021297

Source tier

official

Documents, notices & source

See the official notice and source documents for full details.

View full official notice
Something wrong on this page?

Weekly recall digest

Get next week's recalls before you need them.

One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.

The digest arrives once a week. For matching recall alerts after notices are processed, get the app.

This recall was published 8 Nov 2018. The next one won't wait for you to search.

RecallScope checks listed publishers for the brands and VINs you follow, and can alert you when a matching notice is processed.

apple-buttongoogle-button