Image available on the official notice.
Passenger cars (BMW iX3 M Sport and 12 other models) - Repair
Official notice
11 Sept 2025
Last checked
27 Oct 2026
An official CAA Japan notice concerns Passenger cars (BMW iX3 M Sport and 12 other models) - Repair. Defect in the drive system (electric control unit). ■ Defective component: Drive system (electric control unit). ■ Nature and cause of the defective structure, equipment or performance: Due to insufficient design consideration of the insulation monitoring function of the electric control unit's high-voltage system, if foreign matter adheres between the brush module and bearing shield inside the electric drive unit and causes insulation failure, the location of abnormal insulation resistance may not be detected correctly. Consequently, the system may incorrectly determine that abnormal insulation resistance is present throughout the circuit, shut down the high-voltage battery system, stop the vehicle while driving and prevent it from restarting. Published 2025-09-11.
What to do now
Recall notification number: 外-4065. ■ Corrective measures: Reprogram the insulation monitoring software in all vehicles with the remedial program. This will be performed by either of the following methods: - Bring the vehicle to a dealer and connect it to diagnostic equipment. - Once ready, distribute the software remotely to affected vehicles for users to install themselves. For ZAA-42DU44 only, software preparation will take additional time; users will be informed of the defect and contacted again once it is ready.
Recall number
外-4065
Official notice
2025-09-11
The hazard
The hazard
Defect in the drive system (electric control unit). ■ Defective component: Drive system (electric control unit). ■ Nature and cause of the defective structure, equipment or performance: Due to insufficient design consideration of the insulation monitoring function of the electric control unit's high-voltage system, if foreign matter adheres between the brush module and bearing shield inside the electric drive unit and causes insulation failure, the location of abnormal insulation resistance may not be detected correctly. Consequently, the system may incorrectly determine that abnormal insulation resistance is present throughout the circuit, shut down the high-voltage battery system, stop the vehicle while driving and prevent it from restarting.
How to check if you're affected
How to check if you're affected
Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.
Models
Recall Numbers
Checked manually this time?
Add your VIN to the app Watchlist to receive alerts for matching official notices.
Turn on automatic VIN checksAffected VINs (4)
Affected VINs (4)
The official notice holds the authoritative list of all 4 VINs.
Check my VIN automaticallyAffected products
Affected products
Product 1
Product 2
Hazard
Where it was sold
Where it was sold
Retailer information is not currently available in RecallScope. Check the official notice for distribution details.
Location 1
Affected area 1
Company & contacts
Company & contacts
Brand: BMW. Contact: ビー・エム・ダブリュー株式会社. Phone 0120-954-018.
Source & status
Source & status
Recall details
Recall details
Recall number
Event id
Source tier
Documents, notices & source
See the official notice and source documents for full details.
View full official noticeWeekly recall digest
Get next week's recalls before you need them.
One email every Monday — official-source recalls for your country, and nothing else. Unsubscribe from any email.
The digest arrives once a week. For matching recall alerts after notices are processed, get the app.