Open official notice

Bd alaris™ syringe pumps

Official notice

20 Feb 2026

RecallScope risk estimate:CriticalHealth Canada

An official Health Canada notice concerns Bd alaris™ syringe pumps. BD has identified through an internal investigation that the BD Alaris™ syringe pumps may develop a mechanical anomaly on the linear potentiometer if the device is not stored in the correct position. The syringe plunger moves along the linear potentiometer component during infusion. This is an internal component and not readily visible to the clinical user. If this anomaly occurs, it can lead to incorrect sensor readings, which may trigger error codes PL3, PL8, or PL9. These PL error codes are an intentional design feature that notify the clinical user that the syringe pump has detected an internal malfunction and can occur for a number of reasons. The PL3/PL8/PL9 error codes result in the syringe pump issuing an error message along with a red illuminated beacon, and a high priority alarm tone. If an infusion is in progress, it will stop. The error code will be displayed on the syringe pump as , see below image example of a PL9 error code. Published 2026-02-20.

What to do now

Contact the manufacturer if you require additional information.

Recall number

81631

Official notice

2026-02-20

The hazard

BD has identified through an internal investigation that the BD Alaris™ syringe pumps may develop a mechanical anomaly on the linear potentiometer if the device is not stored in the correct position. The syringe plunger moves along the linear potentiometer component during infusion. This is an internal component and not readily visible to the clinical user. If this anomaly occurs, it can lead to incorrect sensor readings, which may trigger error codes PL3, PL8, or PL9. These PL error codes are an intentional design feature that notify the clinical user that the syringe pump has detected an internal malfunction and can occur for a number of reasons. The PL3/PL8/PL9 error codes result in the syringe pump issuing an error message along with a red illuminated beacon, and a high priority alarm tone. If an infusion is in progress, it will stop. The error code will be displayed on the syringe pump as , see below image example of a PL9 error code.

How to check if you’re affected

Compare the product name and identifiers below with the item you own. Check the official notice for the affected products and next steps.

Skus

8002MED01-G, 8002TIG01-G, 8002TIG03-G, 8005PK201, 8005TIG01, 8005TIG03, 8003TIG01-G, 8003TIG03-G, 8003MED01-G

Other

RA RA-81631

Model numbers

8002MED01-G, 8002TIG01-G, 8002TIG03-G, 8005PK201, 8005TIG01, 8005TIG03, 8003TIG01-G, 8003TIG03-G, 8003MED01-G

Recall Numbers

81631

Checked manually this time?

Follow brands and keywords in the app to receive alerts for matching official notices.

Turn on recall alerts

Affected products

Product 1

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8002MED01-G

Product 2

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8002TIG01-G

Product 3

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8002TIG03-G

Product 4

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8005PK201

Product 5

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8005TIG01

Product 6

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8005TIG03

Product 7

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8003TIG01-G

Product 8

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8003TIG03-G

Product 9

Lot or serial number - More than 10 numbers, contact manufacturer., Model or catalogue number - 8003MED01-G

Hazard

BD has identified through an internal investigation that the BD Alaris™ syringe pumps may develop a mechanical anomaly on the linear potentiometer if the device is not stored in the correct position. The syringe plunger moves along the linear potentiometer component during infusion. This is an internal component and not readily visible to the clinical user. If this anomaly occurs, it can lead to incorrect sensor readings, which may trigger error codes PL3, PL8, or PL9. These PL error codes are an intentional design feature that notify the clinical user that the syringe pump has detected an internal malfunction and can occur for a number of reasons. The PL3/PL8/PL9 error codes result in the syringe pump issuing an error message along with a red illuminated beacon, and a high priority alarm tone. If an infusion is in progress, it will stop. The error code will be displayed on the syringe pump as , see below image example of a PL9 error code.

Where it was sold

Retailer information is not currently available in RecallScope. Check the official notice for distribution details.

Location 1

CA · Canada

Affected area 1

CA · Canada

Company & contacts

Manufacturer

Not provided

Phone

Not provided

Brand: Bd Switzerland Sarl.

Source & status

Tier

beta

Category

Health

Official classification

Type II

Recall details

Recall number

81631

Source tier

beta

Documents, notices & source

See the official notice and source documents for full details.

View full official notice
Something wrong on this page?

Weekly recall digest

Get next week’s recalls before you need them.

One email every Monday with official-source recalls for your country, and nothing else. Unsubscribe from any email.

The digest arrives once a week. For matching recall alerts after notices are processed, get the app.

This recall was published 20 Feb 2026. The next one won’t wait for you to search.

RecallScope checks listed publishers for the brands and VINs you follow, and can alert you when a matching notice is processed.

apple-buttongoogle-button